I recently came across some fabric that as soon as I saw it, I knew it needed to be in my hands. I know you’ve been there, right? :) I decided to make some really easy pillow covers with this super fab geometric print, but these covers have a cozy twist.
It’s backed with sweatshirt fleece!
Supplies:
- one square/rectangle of main fabric – the size will depend on the size of your pillow form
- sweatshirt fleece fabric – you will need a little bit more than your other fabric, but again, the amount will depend on your pillow form
- sewing machine/serger/sewing notions/etc.
2. Press one of the long sides of the sweatshirt fleece over about 1/3in. and sew a straight stitch. Repeat this with the other piece of sweatshirt fleece. This step isn’t actually necessary with sweatshirt fleece, since it doesn’t fray, it just makes a more “finished” look for your pillow. I made this pillow using the same method and didn’t do this step. I’m pretty sure no one notices but me ;)
4. Lay one of the fleece pieces on top of the main fabric – right sides together like this.
5. Lay the other piece right side down, with the stitched seam on the opposite side.
At this point, I decided that my sweatshirt fleece pieces were too long, and I wanted the seams closer together. I moved them like you see in the above picture and just cut off the extra fabric on the ends.
6. Pin your fabric in place and sew all around. If you don’t use a serger, make sure you finish your edges if you use a woven fabric for your main fabric, because that will fray.
Then turn it right side out and enjoy your new cozy pillow!
I can’t decide… living room?
Or bedroom?
